XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

Ansys Fluent tutorial: Non-dimensional laminar flow

$ 26.00
In this training package, you will learn how to simulate a non-dimensional laminar flow inside a pipe, creating the model geometry, creating the mesh, defining boundary conditions, defining material properties, defining the solver criteria, and finally extracting the results.

Contents

  • Tutorial training video (*.mp4)
  • Fluent files (in ANSYS workbench)
  • Fluent lecture notes (*.pdf)
  • Free support up to 3 months

Abaqus Tutorial: LaRC05 failure criterion for fiber-reinforced composites

$ 30.00
In this training video, first, an introduction to failure criteria is given. Then, the formulation and theory of failure criterion (LaRC05) are explained and the methods of using it in Abaqus software are examined.

Contents

  • Training video
  • PDF file Description provided in the video
  • A step-by-step written guide to using the criteria in Abaqus
  • 19 inp file ready to use in ABAQUS software

Abaqus Validation: Coupled thermal-stress analysis of a disc-pad brake

$ 112.00
In this Abaqus tutorial package, a solid disk brake of a Red Flag CA7220 car with initial rotational velocity will contact a disk pad. Effects of friction will be an increase of disk temperature due to heat generated by energy dissipation and the reduction of rotational velocity. The numerical results were validated by the Gao & Lin, (2002) paper.

Contents

  • Step-by-step training video which describes theories behind and how to model (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Abaqus lecture notes (*.pdf)
  • Guarantee up to 3 months

Abaqus Validation: Shot peening induced residual stresses using ABAQUS

$ 85.00
This package describes a three-dimensional dynamic finite element (FE) study of single-shot impacting on a metallic component using Abaqus/CAE software. The prediction is validated by comparison with results from the published literature by Meguid et al. (1999).
XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab Fashion
Featured
  • Featured
  • Man
  • Woman

Abaqus Validation: Coupled thermal-stress analysis of a disc-pad brake

$ 112.00
In this Abaqus tutorial package, a solid disk brake of a Red Flag CA7220 car with initial rotational velocity will contact a disk pad. Effects of friction will be an increase of disk temperature due to heat generated by energy dissipation and the reduction of rotational velocity. The numerical results were validated by the Gao & Lin, (2002) paper.

Contents

  • Step-by-step training video which describes theories behind and how to model (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Abaqus lecture notes (*.pdf)
  • Guarantee up to 3 months

USDFLD Subroutine: 3D Hashin failure criteria for Abaqus

$ 124.00
In this training package, you will learn how to use user-defined field variables or USDFLD subroutines in Abaqus to predict composite damage using 3D Hashin failure criteria. Also, a practical example shows you how to write the subroutine, how to configure the model in Abaqus/CAE, and how to visualize the results. Finally, the performance of the code is validated with the Chang & Lessard failure criterion which is available in Abaqus documentation.

Contents

  • Tutorial training video (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • USDFLD subroutine (*.for)
  • Abaqus lecture notes (*.pdf)
  • Free technical support (3 months)

Abaqus Tutorial: LaRC05 failure criterion for fiber-reinforced composites

$ 30.00
In this training video, first, an introduction to failure criteria is given. Then, the formulation and theory of failure criterion (LaRC05) are explained and the methods of using it in Abaqus software are examined.

Contents

  • Training video
  • PDF file Description provided in the video
  • A step-by-step written guide to using the criteria in Abaqus
  • 19 inp file ready to use in ABAQUS software

Abaqus Validation: Shot peening induced residual stresses using ABAQUS

$ 85.00
This package describes a three-dimensional dynamic finite element (FE) study of single-shot impacting on a metallic component using Abaqus/CAE software. The prediction is validated by comparison with results from the published literature by Meguid et al. (1999).
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

UHYPER Subroutine: Modelling Porous Elastomers with Abaqus/Standard

$ 55.00
This ABAQUS UHYPER subroutine implements the hyperelastic energy density derived for the macroscopic elastic response of non-Gaussian elastomers weakened by an isotropic and non-ercolative distribution of equiaxed pores. This result is valid for any choice of I1-based incompressible energy density characterizing the non-Gaussian isotropic elastic response of the underlying elastomer.

Contents

  • Training video; How to use the subroutine in Abaqus
  • PDF file Description of the hyperelastic model
  • A step-by-step written guide to using the criteria in Abaqus
  • 5 input example files ready to use in ABAQUS software
  • FORTRAN UHYPER subroutine run on Windows or Linux

1200 materials library abaqus plugin | metal, composite, ceramic, concrete | elastic, plastic, damage

$ 250.00
MatLib: Abaqus material library plugin has been used in various industrial and research projects and has parameters of various engineering materials (such as metal, composite, ceramic, concrete, etc.) with different behaviors (such as elastic, plastic, damage, etc.) and each user can use it in its research and work. This will reduce the time required to determine the parameters of the material, its calibration, ensuring its accuracy and the like, and the time required to perform the simulation will be greatly reduced.

Contents

  • MatLib Abaqus material library in 3 units
  • Training video (*.mp4)
  • Installation guide (*.pdf)
  • Get updates up to 3 years

ABAQUS Tutorial: Multiple Step Analysis in Abaqus

$ 65.00
In this training package, you will learn how to transfer the results of heat transfer analysis, such as thermal stress, from the Abaqus/ standard to impact analysis in Abaqus/explicit as an initial condition. You will learn the limitations, technical tips in modeling, as well as a practical example for low-velocity impact analysis on a composite plate.

Contents

  • Step-by-step training video which describes theories behind and how to model (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Abaqus lecture notes (*.pdf)
  • Guarantee up to 3 month

Abaqus Validation: Coupled thermal-stress analysis of a disc-pad brake

$ 112.00
In this Abaqus tutorial package, a solid disk brake of a Red Flag CA7220 car with initial rotational velocity will contact a disk pad. Effects of friction will be an increase of disk temperature due to heat generated by energy dissipation and the reduction of rotational velocity. The numerical results were validated by the Gao & Lin, (2002) paper.

Contents

  • Step-by-step training video which describes theories behind and how to model (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Abaqus lecture notes (*.pdf)
  • Guarantee up to 3 months
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

ABAQUS Tutorial: Multiple Step Analysis in Abaqus

$ 65.00
In this training package, you will learn how to transfer the results of heat transfer analysis, such as thermal stress, from the Abaqus/ standard to impact analysis in Abaqus/explicit as an initial condition. You will learn the limitations, technical tips in modeling, as well as a practical example for low-velocity impact analysis on a composite plate.

Contents

  • Step-by-step training video which describes theories behind and how to model (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Abaqus lecture notes (*.pdf)
  • Guarantee up to 3 month

Abaqus Validation: Coupled thermal-stress analysis of a disc-pad brake

$ 112.00
In this Abaqus tutorial package, a solid disk brake of a Red Flag CA7220 car with initial rotational velocity will contact a disk pad. Effects of friction will be an increase of disk temperature due to heat generated by energy dissipation and the reduction of rotational velocity. The numerical results were validated by the Gao & Lin, (2002) paper.

Contents

  • Step-by-step training video which describes theories behind and how to model (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Abaqus lecture notes (*.pdf)
  • Guarantee up to 3 months

1200 materials library abaqus plugin | metal, composite, ceramic, concrete | elastic, plastic, damage

$ 250.00
MatLib: Abaqus material library plugin has been used in various industrial and research projects and has parameters of various engineering materials (such as metal, composite, ceramic, concrete, etc.) with different behaviors (such as elastic, plastic, damage, etc.) and each user can use it in its research and work. This will reduce the time required to determine the parameters of the material, its calibration, ensuring its accuracy and the like, and the time required to perform the simulation will be greatly reduced.

Contents

  • MatLib Abaqus material library in 3 units
  • Training video (*.mp4)
  • Installation guide (*.pdf)
  • Get updates up to 3 years

Abaqus Tutorial: LaRC05 failure criterion for fiber-reinforced composites

$ 30.00
In this training video, first, an introduction to failure criteria is given. Then, the formulation and theory of failure criterion (LaRC05) are explained and the methods of using it in Abaqus software are examined.

Contents

  • Training video
  • PDF file Description provided in the video
  • A step-by-step written guide to using the criteria in Abaqus
  • 19 inp file ready to use in ABAQUS software
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

USDFLD Subroutine: 3D Hashin failure criteria for Abaqus

$ 124.00
In this training package, you will learn how to use user-defined field variables or USDFLD subroutines in Abaqus to predict composite damage using 3D Hashin failure criteria. Also, a practical example shows you how to write the subroutine, how to configure the model in Abaqus/CAE, and how to visualize the results. Finally, the performance of the code is validated with the Chang & Lessard failure criterion which is available in Abaqus documentation.

Contents

  • Tutorial training video (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • USDFLD subroutine (*.for)
  • Abaqus lecture notes (*.pdf)
  • Free technical support (3 months)

UHYPER Subroutine: Modelling Porous Elastomers with Abaqus/Standard

$ 55.00
This ABAQUS UHYPER subroutine implements the hyperelastic energy density derived for the macroscopic elastic response of non-Gaussian elastomers weakened by an isotropic and non-ercolative distribution of equiaxed pores. This result is valid for any choice of I1-based incompressible energy density characterizing the non-Gaussian isotropic elastic response of the underlying elastomer.

Contents

  • Training video; How to use the subroutine in Abaqus
  • PDF file Description of the hyperelastic model
  • A step-by-step written guide to using the criteria in Abaqus
  • 5 input example files ready to use in ABAQUS software
  • FORTRAN UHYPER subroutine run on Windows or Linux

VUMAT Subroutine: Shear modified Gurson–Tvergaard-Needleman (GTN) damage model

$ 275.00
In this product, The modified GTN model proposed by Gatea et al. was implemented in Abaqus software using VUMAT subroutines. In this model, in addition to the original GTN model, the effects of plastic anisotropy and shear have been added to increase the accuracy of solving this damage model.

Contents

  • User documentation (PDF)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Fortran file (*.for)
  • GTN damage material data (*.xls)

VUMAT subroutine: 3D Hashin failure criteria in Abaqus with exponential damage evolution

$ 399.00
In order to effectively describe the progressively intralaminar and interlaminar damage for composite laminates, a three-dimensional progressive damage model for composite laminates to be used for low-velocity impact is presented. it is based on continuum damage mechanics (CDM) and was developed and implemented in the user subroutine of ABAQUS/explicit, VUMAT. the nonlinear damage model can be used to analyze the dynamic performance of the composite structure and its failure behavior. For the intralaminar damage, as a function of the energy release rate, the damage model in an exponential function can describe the progressive development of the damage. VUMAT subroutine is validated by well-known papers and can be used in any simulations.  

Contents

  • Tensile test validation (*.cae, *.inp, *.jnl, *.odb)
  • Compression test validation (*.cae, *.inp, *.jnl, *.odb)
  • Shear test validation (*.cae, *.inp, *.jnl, *.odb)
  • 3D Hashin VUMAT Subroutine with exponential damage evolution (*.for, *.f)
  • User manual (*.pdf)
  • Guarantee up to 3 years
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

Ansys Fluent tutorial: Non-dimensional laminar flow

$ 26.00
In this training package, you will learn how to simulate a non-dimensional laminar flow inside a pipe, creating the model geometry, creating the mesh, defining boundary conditions, defining material properties, defining the solver criteria, and finally extracting the results.

Contents

  • Tutorial training video (*.mp4)
  • Fluent files (in ANSYS workbench)
  • Fluent lecture notes (*.pdf)
  • Free support up to 3 months

Abaqus Tutorial: LaRC05 failure criterion for fiber-reinforced composites

$ 30.00
In this training video, first, an introduction to failure criteria is given. Then, the formulation and theory of failure criterion (LaRC05) are explained and the methods of using it in Abaqus software are examined.

Contents

  • Training video
  • PDF file Description provided in the video
  • A step-by-step written guide to using the criteria in Abaqus
  • 19 inp file ready to use in ABAQUS software

UHYPER Subroutine: Modelling Porous Elastomers with Abaqus/Standard

$ 55.00
This ABAQUS UHYPER subroutine implements the hyperelastic energy density derived for the macroscopic elastic response of non-Gaussian elastomers weakened by an isotropic and non-ercolative distribution of equiaxed pores. This result is valid for any choice of I1-based incompressible energy density characterizing the non-Gaussian isotropic elastic response of the underlying elastomer.

Contents

  • Training video; How to use the subroutine in Abaqus
  • PDF file Description of the hyperelastic model
  • A step-by-step written guide to using the criteria in Abaqus
  • 5 input example files ready to use in ABAQUS software
  • FORTRAN UHYPER subroutine run on Windows or Linux

ABAQUS Tutorial: Multiple Step Analysis in Abaqus

$ 65.00
In this training package, you will learn how to transfer the results of heat transfer analysis, such as thermal stress, from the Abaqus/ standard to impact analysis in Abaqus/explicit as an initial condition. You will learn the limitations, technical tips in modeling, as well as a practical example for low-velocity impact analysis on a composite plate.

Contents

  • Step-by-step training video which describes theories behind and how to model (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Abaqus lecture notes (*.pdf)
  • Guarantee up to 3 month
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture