A MODERN TWIST
Adipisicing elit
FEATURED PRODUCTS
There are many variations of passages of lorem ipsum available.
3D modelling of Low-Velocity Impact FRP Laminate with LS-Dyna
In this training package, we have tried to cover all the tips and tricks that are required by the user when modeling low-velocity impact on FRP composite laminates with LS-Dyna. Material models for composite & cohesive are available in the LS-Dyna and its parameters are described. Also, the modeling methods of geometry, FRP, cohesive, contacts &, etc. are explained one by one. Finally, in a comprehensive example, the LS-Dyna model is validated by Guo et al. (2013) paper. All the modeling & results files, as well as a tutorial training video, are included in this package.
Concrete Modelling in Abaqus
In this training package, we have tried to cover all the tips and tricks that are required by the user when modeling concrete structures. Material models available in the Abaqus and its parameters are described. Also, the modeling methods of rebars and reinforcements are expressed one by one and the strengths and weaknesses of each are examined. Finally, in 3 comprehensive examples in the field of explosion, fire, and connections, these cases are used in practice.
VUMAT for the Johnson, Holmquist, and Beissel (JHB) And Johnson-Holmquist (JH-2) ceramic model
In this training package, you will learn how to use Built-in VUMAT subroutines in Abaqus to predict brittle materials (e.g. ceramic materials) damage using Johnson, Holmquist, and Beissel (JHB) and Johnson-Holmquist (JH-2) ceramic model. Also, 5 practical workshops show you how to define and use the subroutine, how to configure the model in Abaqus/CAE, and how to visualize the results.
laminar flow | Ansys Fluent tutorial | Non-dimensional
In this training package, you will learn how to simulate a non-dimensional laminar flow inside a pipe, creating the model geometry, creating the mesh, defining boundary conditions, defining material properties, defining the solver criteria, and finally extracting the results.
Contents
- Tutorial training video (*.mp4)
- Fluent files (in ANSYS workbench)
- Fluent lecture notes (*.pdf)
- Free support up to 3 months
3D modelling of Low-Velocity Impact FRP Laminate with LS-Dyna
In this training package, we have tried to cover all the tips and tricks that are required by the user when modeling low-velocity impact on FRP composite laminates with LS-Dyna. Material models for composite & cohesive are available in the LS-Dyna and its parameters are described. Also, the modeling methods of geometry, FRP, cohesive, contacts &, etc. are explained one by one. Finally, in a comprehensive example, the LS-Dyna model is validated by Guo et al. (2013) paper. All the modeling & results files, as well as a tutorial training video, are included in this package.
Concrete Modelling in Abaqus
In this training package, we have tried to cover all the tips and tricks that are required by the user when modeling concrete structures. Material models available in the Abaqus and its parameters are described. Also, the modeling methods of rebars and reinforcements are expressed one by one and the strengths and weaknesses of each are examined. Finally, in 3 comprehensive examples in the field of explosion, fire, and connections, these cases are used in practice.
VUMAT for the Johnson, Holmquist, and Beissel (JHB) And Johnson-Holmquist (JH-2) ceramic model
In this training package, you will learn how to use Built-in VUMAT subroutines in Abaqus to predict brittle materials (e.g. ceramic materials) damage using Johnson, Holmquist, and Beissel (JHB) and Johnson-Holmquist (JH-2) ceramic model. Also, 5 practical workshops show you how to define and use the subroutine, how to configure the model in Abaqus/CAE, and how to visualize the results.
laminar flow | Ansys Fluent tutorial | Non-dimensional
In this training package, you will learn how to simulate a non-dimensional laminar flow inside a pipe, creating the model geometry, creating the mesh, defining boundary conditions, defining material properties, defining the solver criteria, and finally extracting the results.
Contents
- Tutorial training video (*.mp4)
- Fluent files (in ANSYS workbench)
- Fluent lecture notes (*.pdf)
- Free support up to 3 months
Explore the striking exclusive collections
On projection apartments unsatiable so if he entreaties appearance. Rose you wife how set lady half wish. Hard sing an in true felt. Welcomed stronger if steepest ecstatic an suitable finished of oh entered.
And produce say the ten moments parties. Simple innate summer fat appear basket his desire joy. Outward clothes promise at gravity.
Adipisicing elit
ENGAGEMENT & WEDDING
There are many variations of passages of lorem ipsum available.
3D modelling of Low-Velocity Impact FRP Laminate with LS-Dyna
In this training package, we have tried to cover all the tips and tricks that are required by the user when modeling low-velocity impact on FRP composite laminates with LS-Dyna. Material models for composite & cohesive are available in the LS-Dyna and its parameters are described. Also, the modeling methods of geometry, FRP, cohesive, contacts &, etc. are explained one by one. Finally, in a comprehensive example, the LS-Dyna model is validated by Guo et al. (2013) paper. All the modeling & results files, as well as a tutorial training video, are included in this package.
Concrete Modelling in Abaqus
In this training package, we have tried to cover all the tips and tricks that are required by the user when modeling concrete structures. Material models available in the Abaqus and its parameters are described. Also, the modeling methods of rebars and reinforcements are expressed one by one and the strengths and weaknesses of each are examined. Finally, in 3 comprehensive examples in the field of explosion, fire, and connections, these cases are used in practice.
VUMAT for the Johnson, Holmquist, and Beissel (JHB) And Johnson-Holmquist (JH-2) ceramic model
In this training package, you will learn how to use Built-in VUMAT subroutines in Abaqus to predict brittle materials (e.g. ceramic materials) damage using Johnson, Holmquist, and Beissel (JHB) and Johnson-Holmquist (JH-2) ceramic model. Also, 5 practical workshops show you how to define and use the subroutine, how to configure the model in Abaqus/CAE, and how to visualize the results.
laminar flow | Ansys Fluent tutorial | Non-dimensional
In this training package, you will learn how to simulate a non-dimensional laminar flow inside a pipe, creating the model geometry, creating the mesh, defining boundary conditions, defining material properties, defining the solver criteria, and finally extracting the results.
Contents
- Tutorial training video (*.mp4)
- Fluent files (in ANSYS workbench)
- Fluent lecture notes (*.pdf)
- Free support up to 3 months
USDFLD Subroutine: 3D Hashin failure criteria for Abaqus
USDFLD Subroutine 3D Hashin: In this training package, you will learn how to use user-defined field variables or USDFLD subroutines in Abaqus to predict composite damage using 3D Hashin failure criteria. Also, a practical example shows you how to write the subroutine, how to configure the model in Abaqus/CAE, and how to visualize the results. Finally, the performance of the code is validated with the Chang & Lessard failure criterion which is available in Abaqus documentation.
Contents
- Tutorial training video (*.mp4)
- Abaqus files (*.cae, *.inp, *.jnl, *.odb)
- USDFLD subroutine (*.for)
- Abaqus lecture notes (*.pdf)
- Free technical support (3 months)
DISCOUNT OF 20%
ON ALL GOLD RINGS
She exposed painted fifteen are noisier mistake led waiting. Surprise not wandered speedily husbands although yet end. Are court tiled cease young built fat one man taken. We highest ye friends is exposed equally in. Ignorant had too.
FEATURED PRODUCTS
NEW PRODUCTS
Adipisicing elit
SHOP OUR INSTAGRAM
There are many variations of passages of lorem ipsum available.
Join us and get discounts every month up to 20%
Friendship contrasted solicitude insipidity in introduced literature it.
Adipisicing elit
WHAT OUR CLIENTS SAY
Adipisicing elit
JEWELRY DESIGN BLOG
There are many variations of passages of lorem ipsum available.
11
May
Why should we still use simulation even if we do reverse engineering?
Simulation in reverse engineering
Simulation in reverse engineering: For the past few years, I have ...
29
Nov
ABAQUS 2022 is released
What’s New in ABAQUS 2022?
Performance improvements, NEW material m...
03
Nov
Built-in material models in Abaqus
Built-in material models in Abaqus
ABAQUS has a number of little-known built-in material model s th...
16
Oct
Abaqus material library plugin
What is Abaqus Metrial Library and how do I get it:
To buy abaqus material library plugin from our s...
16
Oct
eXtended Finite Element Method (XFEM) step by step example for Abaqus Users
eXtended Finite Element Method (XFEM)
In this tutorial, we ...
14
Oct
Manual strength estimation, before Abaqus software
manual strength estimation
Manual strength estimation? I rea...
10
Oct
perform the project with Abaqus
See the completed projects (with full technical report here)
Why you should get help from us to do industri...
18
Mar
3 Top software for flow and stress analysis of pipelines
Be sure to visit the project store
3 Top software for flow and stress analysis of pipelines
Question :
Which software is better fo...
