Simple -
Rock Chair.
Semper vulputate aliquam curae condimentum quisque gravida fusce convallis arcu cum at.
$199.00
Eames -
Side Chair.
Semper vulputate aliquam curae condimentum quisque gravida fusce convallis arcu cum at.
Only $99.00
CAPPELLINI
Wooden
Lounge Chairs.
Semper vulputate aliquam curae entum quisque gravida fusce cum at.
$999.00
WOODMART COLLECTIONS
FEATURED CATEGORIES
WoodMart is a powerful eCommerce theme for WordPress.
WOODEN ACCESSORIES
FEATURED PRODUCTS
Visit our shop to see amazing creations from our designers.
3D modelling of Low-Velocity Impact FRP Laminate with LS-Dyna
In this training package, we have tried to cover all the tips and tricks that are required by the user when modeling low-velocity impact on FRP composite laminates with LS-Dyna. Material models for composite & cohesive are available in the LS-Dyna and its parameters are described. Also, the modeling methods of geometry, FRP, cohesive, contacts &, etc. are explained one by one. Finally, in a comprehensive example, the LS-Dyna model is validated by Guo et al. (2013) paper. All the modeling & results files, as well as a tutorial training video, are included in this package.
Abaqus Tutorial: LaRC05 failure criterion for fiber-reinforced composites
In this training video, first, an introduction to failure criteria is given. Then, the formulation and theory of failure criterion (LaRC05) are explained and the methods of using it in Abaqus software are examined.
Contents
- Training video
- PDF file Description provided in the video
- A step-by-step written guide to using the criteria in Abaqus
- 19 inp file ready to use in ABAQUS software
ABAQUS Tutorial: Multiple Step Analysis in Abaqus
In this training package, you will learn how to transfer the results of heat transfer analysis, such as thermal stress, from the Abaqus/ standard to impact analysis in Abaqus/explicit as an initial condition. You will learn the limitations, technical tips in modeling, as well as a practical example for low-velocity impact analysis on a composite plate.
Contents
- Step-by-step training video which describes theories behind and how to model (*.mp4)
- Abaqus files (*.cae, *.inp, *.jnl, *.odb)
- Abaqus lecture notes (*.pdf)
- Guarantee up to 3 month
ABAQUS Tutorial: Stress analysis of rolling contact of a wheel with the UIC60 profile rail
Modeling the rotation of a train wheel on a rail has tips that are trained in this tutorial video. In addition to the tutorial video , the abaqus files and their results will be provided to you so that nothing will remain unclear to you. In addition, all trainings include free online response after purchase.
Contents
- Step-by-step training video which describes theories behind and how to model (*.mp4)
- Abaqus files (*.cae, *.inp, *.jnl, *.odb)
- Guarantee up to 1 years
Abaqus Validation: Coupled thermal-stress analysis of a disc-pad brake
In this Abaqus tutorial package, a solid disk brake of a Red Flag CA7220 car with initial rotational velocity will contact a disk pad. Effects of friction will be an increase of disk temperature due to heat generated by energy dissipation and the reduction of rotational velocity. The numerical results were validated by the Gao & Lin, (2002) paper.
Contents
- Step-by-step training video which describes theories behind and how to model (*.mp4)
- Abaqus files (*.cae, *.inp, *.jnl, *.odb)
- Abaqus lecture notes (*.pdf)
- Guarantee up to 3 months
Abaqus Validation: Shot peening induced residual stresses using ABAQUS
This package describes a three-dimensional dynamic finite element (FE) study of single-shot impacting on a metallic component using Abaqus/CAE software. The prediction is validated by comparison with results from the published literature by Meguid et al. (1999).
Concrete Modelling in Abaqus
In this training package, we have tried to cover all the tips and tricks that are required by the user when modeling concrete structures. Material models available in the Abaqus and its parameters are described. Also, the modeling methods of rebars and reinforcements are expressed one by one and the strengths and weaknesses of each are examined. Finally, in 3 comprehensive examples in the field of explosion, fire, and connections, these cases are used in practice.
laminar flow | Ansys Fluent tutorial | Non-dimensional
In this training package, you will learn how to simulate a non-dimensional laminar flow inside a pipe, creating the model geometry, creating the mesh, defining boundary conditions, defining material properties, defining the solver criteria, and finally extracting the results.
Contents
- Tutorial training video (*.mp4)
- Fluent files (in ANSYS workbench)
- Fluent lecture notes (*.pdf)
- Free support up to 3 months
ALL-IN-ONE ECOMMERCE SOLUTION
ABOUT OUR WOODMART STORE
Nec adipiscing luctus consequat penatibus parturient massa cubilia etiam a adipiscing enigm dignissim congue egestas sapien a. Scelerisque ac non ut ac bibendum himenaeos ullamcorper justo himenaeos vel a sapien quis.
FURNITURE GUIDES
OUR LATEST NEWS
Latest trends and inspiration in interior design.
11
May
Why should we still use simulation even if we do reverse engineering?
Simulation in reverse engineering
Simulation in reverse engineering: For the past few years, I have ...
29
Nov
ABAQUS 2022 is released
What’s New in ABAQUS 2022?
Performance improvements, NEW material m...
03
Nov
Built-in material models in Abaqus
Built-in material models in Abaqus
ABAQUS has a number of little-known built-in material model s th...
16
Oct
Abaqus material library plugin
What is Abaqus Metrial Library and how do I get it:
To buy abaqus material library plugin from our s...
