Back to products
Training courses
Online training courses
3D Hashin USDFLD Subroutine Failure Criteria for Abaqus
3D Hashin USDFLD Subroutine use to predict 3D Hashin composite damages. it is a functionally validated USDFLD subroutine that the results are compared with the Chang & Lessard failure criterion which is available in Abaqus documentation.Ā This code identifies four damage modes including matrix tension, matrix compression, fiber tension, and fiber compression using the elastic constants with the degraded values.
Contents
- Abaqus files (*.cae, *.inp, *.jnl, *.odb)
- USDFLD subroutine (*.for)
- Manual (*.pdf)
- Free technical support (3 months)
Abaqus Tutorial: LaRC05 failure criterion for fiber-reinforced composites
In this training video, first, an introduction to failure criteria is given. Then, the formulation and theory of failure criterion (LaRC05) are explained and the methods of using it in AbaqusĀ software are examined.
Contents
- Training video
- PDF file Description provided in the video
- A step-by-step written guide to using the criteria in Abaqus
- 19 inp file ready to use in ABAQUS software
3D modelling of Low-Velocity Impact FRP Laminate with LS-Dyna
In this training package, we have tried to cover all the tips and tricks that are required by the user when modeling low-velocity impact on FRP composite laminates with LS-Dyna. Material models for composite & cohesive are available in the LS-Dyna and its parameters are described. Also, the modeling methods of geometry, FRP, cohesive, contacts &, etc. are explained one by one. Finally, in a comprehensive example, the LS-Dyna model is validated by Guo et al. (2013) paper. All the modeling & results files, as well as a tutorial training video, are included in this package.
Concrete Modelling in Abaqus
In this training package, we have tried to cover all the tips and tricks that are required by the user when modeling concrete structures. Material models available in the Abaqus and its parameters are described. Also, the modeling methods of rebars and reinforcements are expressed one by one and the strengths and weaknesses of each are examined. Finally, in 3 comprehensive examples in the field of explosion, fire, and connections, these cases are used in practice.
VUMAT JHB and JH-2 ceramic model | Johnson, Holmquist
In this training package, you will learn how to use Built-in VUMAT subroutines in Abaqus to predict brittle materials (e.g. ceramic materials) damage using Johnson, Holmquist, and Beissel (JHB) and Johnson-Holmquist (JH-2) ceramic model. Also, 5 practical workshops show you how to define and use the subroutine, how to configure the model in Abaqus/CAE, and how to visualize the results.
laminar flow | Ansys Fluent tutorial | Non-dimensional
In this training package, you will learn how to simulate a non-dimensional laminar flow inside a pipe, creating the model geometry, creating the mesh, defining boundary conditions, defining material properties, defining the solver criteria, and finally extracting the results.
Contents
- Tutorial training video (*.mp4)
- Fluent files (in ANSYS workbench)
- Fluent lecture notes (*.pdf)
- Free support up to 3 months
ABAQUS Tutorial: Multiple Step Analysis in Abaqus
In this training package, you will learn how to transfer the results of heat transfer analysis, such as thermal stress, from the Abaqus/ standard to impact analysis in Abaqus/explicit as an initial condition. You will learn the limitations, technical tips in modeling, as well as a practical example for low-velocity impact analysis on a composite plate.
Contents
- Step-by-step training video which describes theories behind and how to model (*.mp4)
- Abaqus files (*.cae, *.inp, *.jnl, *.odb)
- Abaqus lecture notes (*.pdf)
- Guarantee up to 3 month
Stress analysis of rolling contact fatigue of a wheel with the UIC60 profile rail
Modeling the rotation of a train wheel on a rail has tips that are trained in this tutorial video. In addition to the tutorial video , the abaqus files and their results will be provided to you so that nothing will remain unclear to you. In addition, all trainings include free online response after purchase.
Contents
- Step-by-step training video which describes theories behind and how to model (*.mp4)
- Abaqus files (*.cae, *.inp, *.jnl, *.odb)
- Guarantee up to 1 years
Abaqus Validation: Shot peening induced residual stresses using ABAQUS
This package describes a three-dimensional dynamic finite element (FE) study of single-shot impacting on a metallic component using Abaqus/CAE software. The prediction is validated by comparison with results from the published literature by Meguid et al. (1999).
