WOOCOMMERCE

5 STARS PRODUCTS

Products with all positive feedbacks

Abaqus Validation: Shot peening induced residual stresses using ABAQUS

$ 85.00
This package describes a three-dimensional dynamic finite element (FE) study of single-shot impacting on a metallic component using Abaqus/CAE software. The prediction is validated by comparison with results from the published literature by Meguid et al. (1999).

Abaqus Tutorial: LaRC05 failure criterion for fiber-reinforced composites

$ 30.00
In this training video, first, an introduction to failure criteria is given. Then, the formulation and theory of failure criterion (LaRC05) are explained and the methods of using it in Abaqus software are examined.

Contents

  • Training video
  • PDF file Description provided in the video
  • A step-by-step written guide to using the criteria in Abaqus
  • 19 inp file ready to use in ABAQUS software

VUMAT subroutine: 3D Hashin failure criteria in Abaqus with exponential damage evolution

$ 399.00
In order to effectively describe the progressively intralaminar and interlaminar damage for composite laminates, a three-dimensional progressive damage model for composite laminates to be used for low-velocity impact is presented. it is based on continuum damage mechanics (CDM) and was developed and implemented in the user subroutine of ABAQUS/explicit, VUMAT. the nonlinear damage model can be used to analyze the dynamic performance of the composite structure and its failure behavior. For the intralaminar damage, as a function of the energy release rate, the damage model in an exponential function can describe the progressive development of the damage. VUMAT subroutine is validated by well-known papers and can be used in any simulations.  

Contents

  • Tensile test validation (*.cae, *.inp, *.jnl, *.odb)
  • Compression test validation (*.cae, *.inp, *.jnl, *.odb)
  • Shear test validation (*.cae, *.inp, *.jnl, *.odb)
  • 3D Hashin VUMAT Subroutine with exponential damage evolution (*.for, *.f)
  • User manual (*.pdf)
  • Guarantee up to 3 years

ABAQUS Tutorial: Stress analysis of rolling contact of a wheel with the UIC60 profile rail

$ 99.00
  Modeling the rotation of a train wheel on a rail has tips that are trained in this tutorial video. In addition to the tutorial video , the abaqus files and their results will be provided to you so that nothing will remain unclear to you. In addition, all trainings include free online response after purchase.

Contents

  • Step-by-step training video which describes theories behind and how to model (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Guarantee up to 1 years

ABAQUS Tutorial: Multiple Step Analysis in Abaqus

$ 65.00
In this training package, you will learn how to transfer the results of heat transfer analysis, such as thermal stress, from the Abaqus/ standard to impact analysis in Abaqus/explicit as an initial condition. You will learn the limitations, technical tips in modeling, as well as a practical example for low-velocity impact analysis on a composite plate.

Contents

  • Step-by-step training video which describes theories behind and how to model (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Abaqus lecture notes (*.pdf)
  • Guarantee up to 3 month

Ansys Fluent tutorial: Non-dimensional laminar flow

$ 26.00
In this training package, you will learn how to simulate a non-dimensional laminar flow inside a pipe, creating the model geometry, creating the mesh, defining boundary conditions, defining material properties, defining the solver criteria, and finally extracting the results.

Contents

  • Tutorial training video (*.mp4)
  • Fluent files (in ANSYS workbench)
  • Fluent lecture notes (*.pdf)
  • Free support up to 3 months

To set a product rating go to the desired product page and leave a comment for it with the maximum rating of 5 stars.