Abaqus FEA software

Showing all 11 results

Show sidebar

1200 materials library abaqus plugin | abaqus material library

$ 250.00
MatLib: Abaqus material library plugin has been used in various industrial and research projects and has parameters of various engineering materials (such as metal, composite, ceramic, concrete, etc.) with different behaviors (such as elastic, plastic, damage, etc.) and each user can use it in its research and work. This will reduce the time required to determine the parameters of the material, its calibration, ensuring its accuracy and the like, and the time required to perform the simulation will be greatly reduced.

Contents

  • MatLib Abaqus material library in 3 units
  • Training video (*.mp4)
  • Installation guide (*.pdf)
  • Get updates up to 3 years

Abaqus Tutorial: LaRC05 failure criterion for fiber-reinforced composites

$ 30.00
In this training video, first, an introduction to failure criteria is given. Then, the formulation and theory of failure criterion (LaRC05) are explained and the methods of using it in Abaqus software are examined.

Contents

  • Training video
  • PDF file Description provided in the video
  • A step-by-step written guide to using the criteria in Abaqus
  • 19 inp file ready to use in ABAQUS software

ABAQUS Tutorial: Multiple Step Analysis in Abaqus

$ 65.00
In this training package, you will learn how to transfer the results of heat transfer analysis, such as thermal stress, from the Abaqus/ standard to impact analysis in Abaqus/explicit as an initial condition. You will learn the limitations, technical tips in modeling, as well as a practical example for low-velocity impact analysis on a composite plate.

Contents

  • Step-by-step training video which describes theories behind and how to model (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Abaqus lecture notes (*.pdf)
  • Guarantee up to 3 month

ABAQUS Tutorial: Stress analysis of rolling contact of a wheel with the UIC60 profile rail

$ 99.00
 Modeling the rotation of a train wheel on a rail has tips that are trained in this tutorial video. In addition to the tutorial video , the abaqus files and their results will be provided to you so that nothing will remain unclear to you. In addition, all trainings include free online response after purchase.

Contents

  • Step-by-step training video which describes theories behind and how to model (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Guarantee up to 1 years

Abaqus Validation: Coupled thermal-stress analysis of a disc-pad brake

$ 112.00
In this Abaqus tutorial package, a solid disk brake of a Red Flag CA7220 car with initial rotational velocity will contact a disk pad. Effects of friction will be an increase of disk temperature due to heat generated by energy dissipation and the reduction of rotational velocity. The numerical results were validated by the Gao & Lin, (2002) paper.

Contents

  • Step-by-step training video which describes theories behind and how to model (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Abaqus lecture notes (*.pdf)
  • Guarantee up to 3 months

Abaqus Validation: Shot peening induced residual stresses using ABAQUS

$ 85.00
This package describes a three-dimensional dynamic finite element (FE) study of single-shot impacting on a metallic component using Abaqus/CAE software. The prediction is validated by comparison with results from the published literature by Meguid et al. (1999).

UHYPER Subroutine: Modeling Porous Elastomers with Abaqus/Standard

$ 55.00
This ABAQUS UHYPER subroutine implements the hyperelastic energy density derived for the macroscopic elastic response of non-Gaussian elastomers weakened by an isotropic and non-ercolative distribution of equiaxed pores. This result is valid for any choice of I1-based incompressible energy density characterizing the non-Gaussian isotropic elastic response of the underlying elastomer.

Contents

  • Training video; How to use the subroutine in Abaqus
  • PDF file Description of the hyperelastic model
  • A step-by-step written guide to using the criteria in Abaqus
  • 5 input example files ready to use in ABAQUS software
  • FORTRAN UHYPER subroutine run on Windows or Linux

USDFLD Subroutine: 3D Hashin failure criteria for Abaqus

$ 124.00
USDFLD Subroutine 3D Hashin: In this training package, you will learn how to use user-defined field variables or USDFLD subroutines in Abaqus to predict composite damage using 3D Hashin failure criteria. Also, a practical example shows you how to write the subroutine, how to configure the model in Abaqus/CAE, and how to visualize the results. Finally, the performance of the code is validated with the Chang & Lessard failure criterion which is available in Abaqus documentation.

Contents

  • Tutorial training video (*.mp4)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • USDFLD subroutine (*.for)
  • Abaqus lecture notes (*.pdf)
  • Free technical support (3 months)

VUMAT for the Johnson, Holmquist, and Beissel (JHB) And Johnson-Holmquist (JH-2) ceramic model

$ 99.00
In this training package, you will learn how to use Built-in VUMAT subroutines in Abaqus to predict brittle materials (e.g. ceramic materials) damage using Johnson, Holmquist, and Beissel (JHB) and Johnson-Holmquist (JH-2) ceramic model. Also, 5 practical workshops show you how to define and use the subroutine, how to configure the model in Abaqus/CAE, and how to visualize the results.

VUMAT subroutine: 3D Hashin failure criteria in Abaqus with exponential damage evolution

$ 399.00
In order to effectively describe the progressively intralaminar and interlaminar damage for composite laminates, a three-dimensional progressive damage model for composite laminates to be used for low-velocity impact is presented. it is based on continuum damage mechanics (CDM) and was developed and implemented in the user subroutine of ABAQUS explicit, VUMAT. the nonlinear damage model can be used to analyze the dynamic performance of the composite structure and its failure behavior. For the intralaminar damage, as a function of the energy release rate, the damage model in an exponential function can describe the progressive development of the damage. VUMAT subroutine is validated by well-known papers and can be used in any simulations. 

Contents

  • Tensile test validation (*.cae, *.inp, *.jnl, *.odb)
  • Compression test validation (*.cae, *.inp, *.jnl, *.odb)
  • Shear test validation (*.cae, *.inp, *.jnl, *.odb)
  • 3D Hashin VUMAT Subroutine with exponential damage evolution (*.for, *.f)
  • User manual (*.pdf)
  • Guarantee up to 3 years

VUMAT Subroutine: Shear modified Gurson–Tvergaard-Needleman (GTN) damage model

$ 275.00
In this product, The modified GTN model proposed by Gatea et al. was implemented in Abaqus software using VUMAT subroutines. In this model, in addition to the original GTN model, the effects of plastic anisotropy and shear have been added to increase the accuracy of solving this damage model.

Contents

  • User documentation (PDF)
  • Abaqus files (*.cae, *.inp, *.jnl, *.odb)
  • Fortran file (*.for)
  • GTN damage material data (*.xls)