Venice Guide
Mr. Segre Ramelli
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don't look.
WORLD BESTSELLERS
Escape Book
Charles Fredrick
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don't look.
WORLD BESTSELLERS
Simply Elegant
Humbert Jemmy
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don't look.
WORLD BESTSELLERS
āIt is during our darkest moments that we must focus to see the light.ā
-James Brown ā70 years of my historyā
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don’t look even slightly.
Mauris blandit aliquet
Featured Releases
There are many variations of passages of lorem ipsum available.
Abaqus Validation: Shot peening induced residual stresses using ABAQUS
This package describes a three-dimensional dynamic finite element (FE) study of single-shot impacting on a metallic component using Abaqus/CAE software. The prediction is validated by comparison with results from the published literature by Meguid et al. (1999).
MatLib; Abaqus Material Library
Abaqus Tutorial: LaRC05 failure criterion for fiber-reinforced composites
In this training video, first, an introduction to failure criteria is given. Then, the formulation and theory of failure criterion (LaRC05) are explained and the methods of using it in AbaqusĀ software are examined.
Contents
- Training video
- PDF file Description provided in the video
- A step-by-step written guide to using the criteria in Abaqus
- 19 inp file ready to use in ABAQUS software
UHYPER Subroutine: Modeling Porous Elastomers with Abaqus/Standard
This ABAQUS UHYPER subroutine implements the hyperelastic energy density derived for the macroscopic elastic response of non-Gaussian elastomers weakened by an isotropic and non-ercolative distribution of equiaxed pores. This result is valid for any choice of I1-based incompressible energy density characterizing the non-Gaussian isotropic elastic response of the underlying elastomer.
Contents
- Training video; How to use the subroutine in Abaqus
- PDF file Description of the hyperelastic model
- A step-by-step written guide to using the criteria in Abaqus
- 5 input example files ready to use in ABAQUS software
- FORTRAN UHYPER subroutine run on WindowsĀ orĀ Linux
VUMAT Subroutine: Shear modified GursonāTvergaard-Needleman (GTN) damage model
In this product, The modified GTN model proposed by Gatea et al. was implemented in Abaqus software using VUMAT subroutines. In this model, in addition to the original GTN model, the effects of plastic anisotropy and shear have been added to increase the accuracy of solving this damage model.
Contents
- User documentation (PDF)
- Abaqus files (*.cae, *.inp, *.jnl, *.odb)
- Fortran file (*.for)
- GTN damage material data (*.xls)
VUMAT subroutine: 3D Hashin failure criteria in Abaqus with exponential damage evolution
3D Hashin failure criteria in Abaqus with exponential damage evolution
In order to effectively describe the progressively intralaminar and interlaminar damage for composite laminates, a three-dimensional progressive damage model for composite laminates to be used for low-velocity impact is presented. it is based on continuum damage mechanics (CDM) and was developed and implemented in the user subroutine of ABAQUS explicit, VUMAT. the nonlinear damage model can be used to analyze the dynamic performance of the composite structure and its failure behavior. For the intralaminar damage, as a function of the energy release rate, the damage model in an exponential function can describe the progressive development of the damage. VUMAT subroutine is validated by well-known papers and can be used in any simulation.Abaqus hashin example:
This project and similar projects have been reviewed for ŁAbqus Hashin damage models in various materials such as composites. Our engineering team has the ability to design and perform similar calculations, and you can contact our expert team via email and the site. Hashin damage Abaqus is commonly used in fiber-reinforced composite materials. Hashin damage model in Abaqus software has 4 different models:- Fiber stretch
- Fiber compression
- Matrix traction
- Matrix compression
Contents
- Tensile test validation (*.cae, *.inp, *.jnl, *.odb)
- Compression test validation (*.cae, *.inp, *.jnl, *.odb)
- Shear test validation (*.cae, *.inp, *.jnl, *.odb)
- 3D Hashin VUMAT Subroutine with exponential damage evolution (*.for, *.f)
- User manual (*.pdf)
- Guarantee up to 3 years
ABAQUS Tutorial: Stress analysis of rolling contact of a wheel with the UIC60 profile rail
Modeling the rotation of a train wheel on a rail has tips that are trained in this tutorial video. In addition to the tutorial video , the abaqus files and their results will be provided to you so that nothing will remain unclear to you. In addition, all trainings include free online response after purchase.
Contents
- Step-by-step training video which describes theories behind and how to model (*.mp4)
- Abaqus files (*.cae, *.inp, *.jnl, *.odb)
- Guarantee up to 1 years
ABAQUS Tutorial: Multiple Step Analysis in Abaqus
In this training package, you will learn how to transfer the results of heat transfer analysis, such as thermal stress, from the Abaqus/ standard to impact analysis in Abaqus/explicit as an initial condition. You will learn the limitations, technical tips in modeling, as well as a practical example for low-velocity impact analysis on a composite plate.
Contents
- Step-by-step training video which describes theories behind and how to model (*.mp4)
- Abaqus files (*.cae, *.inp, *.jnl, *.odb)
- Abaqus lecture notes (*.pdf)
- Guarantee up to 3 month
BECOME OUR PARTNER
Self-Publishing And Book Printing
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which donāt look even.
Mauris aliquet
Coming Soon
There are many variations of passages of lorem ipsum available.
3D modelling of Low-Velocity Impact FRP Laminate with LS-Dyna
In this training package, we have tried to cover all the tips and tricks that are required by the user when modeling low-velocity impact on FRP composite laminates with LS-Dyna. Material models for composite & cohesive are available in the LS-Dyna and its parameters are described. Also, the modeling methods of geometry, FRP, cohesive, contacts &, etc. are explained one by one. Finally, in a comprehensive example, the LS-Dyna model is validated by Guo et al. (2013) paper. All the modeling & results files, as well as a tutorial training video, are included in this package.
Concrete Modelling in Abaqus
In this training package, we have tried to cover all the tips and tricks that are required by the user when modeling concrete structures. Material models available in the Abaqus and its parameters are described. Also, the modeling methods of rebars and reinforcements are expressed one by one and the strengths and weaknesses of each are examined. Finally, in 3 comprehensive examples in the field of explosion, fire, and connections, these cases are used in practice.
VUMAT for the Johnson, Holmquist, and Beissel (JHB) And Johnson-Holmquist (JH-2) ceramic model
In this training package, you will learn how to use Built-in VUMAT subroutines in Abaqus to predict brittle materials (e.g. ceramic materials) damage using Johnson, Holmquist, and Beissel (JHB) and Johnson-Holmquist (JH-2) ceramic model. Also, 5 practical workshops show you how to define and use the subroutine, how to configure the model in Abaqus/CAE, and how to visualize the results.
laminar flow | Ansys Fluent tutorial | Non-dimensional
In this training package, you will learn how to simulate a non-dimensional laminar flow inside a pipe, creating the model geometry, creating the mesh, defining boundary conditions, defining material properties, defining the solver criteria, and finally extracting the results.
Contents
- Tutorial training video (*.mp4)
- Fluent files (in ANSYS workbench)
- Fluent lecture notes (*.pdf)
- Free support up to 3 months
USDFLD Subroutine: 3D Hashin failure criteria for Abaqus
USDFLD Subroutine 3D Hashin: In this training package, you will learn how to use user-defined field variables or USDFLD subroutines in Abaqus to predict composite damage using 3D Hashin failure criteria. Also, a practical example shows you how to write the subroutine, how to configure the model in Abaqus/CAE, and how to visualize the results. Finally, the performance of the code is validated with the Chang & Lessard failure criterion which is available in Abaqus documentation.
Contents
- Tutorial training video (*.mp4)
- Abaqus files (*.cae, *.inp, *.jnl, *.odb)
- USDFLD subroutine (*.for)
- Abaqus lecture notes (*.pdf)
- Free technical support (3 months)
Commodo integer
Latest Articles
There are many variations of passages of lorem ipsum available.
11
May
Why should we still use simulation even if we do reverse engineering?
Simulation in reverse engineering
Simulation in reverse engineering: For the past few years, I have ...
29
Nov
ABAQUS 2022 is released
Whatās New in ABAQUS 2022?
Performance improvements, NEW material m...
03
Nov
Built-in material models in Abaqus
Built-in material models in Abaqus
ABAQUS has a number of little-known built-in material model s Ā th...
16
Oct
Abaqus material library plugin
What is Abaqus Metrial Library and how do I get it:
To buy abaqus material library plugin from our s...
