Design by Rule
Design by rule is a process used in many industries to design industrial equipment. Nearly 100 years ago, ASME issued the Boiler and Pressure Vessel Code (BPV) design guidelines to enhance industrial safety. Today, ASME VIII is the most widely used pressure vessel design guideline. It has 3 sections, each is related to specific applications and methods.
Data Sheets and Specification Booklet
Large industries have many types of equipment that may have many consumable parts in each. Some of these parts are available in the market but others are supplied through the manufacturing process. With the technical specifications of the piece, it is no longer necessary to have a piece, as all the information needed to make and apply it is explained in the piece. The technical part of a piece is defined as a reference document for each piece of construction.
Test and Re-design
The redesign means re-starting the design process and making changes to improve one or more design goals. In this process, the designer begins to redesign and optimize the product to improve the quality of the product and equipment. Discovering defects in the product, applying ideas to improve and market needs are important reasons for redesigning the product and equipment. The engineers of BanuMusa Co. are ready to upgrade and improve various mechanical equipment with the support of analyzes and using multi-objective optimizations.
Design & Manufacture of Composite Parts
Due to the familiarity of the country’s industry with the benefits of composite materials, the use of these materials instead of metal materials is expanding. The main industries using these materials are aerospace, automotive and marine industries. Because the weight and strength of the structure and the strength of the material in special conditions are important for designers and manufacturers. The experts and engineers of BanuMusa Co. have high experience in designing, analyzing faults and damages, and manufacturing composite parts and equipment. In this regard, many projects have been done by our partners. The company’s composite team is one of the leading researchers in this field.
Molding Design & Analysis
What mold and machine workshops often do not usually consider is the principled execution of an engineering process. Below, the main steps of mold design and analysis as well as modeling of the molding process are explained. Note that the difference between a good template and a bad template can be in the execution or non-execution of any of the following steps.
Engineering Design of Amusement Industry
Design of recreational and amusement facilities according to the standard
According to the latest statistics, there are more than 9,500 recreation and amusement centers in our country, in which more than 50,000 recreational equipment is used. Of these, 915 recreation centers are located in the capital province, which is about 10% of the number of recreation centers in the country. The standard of all play equipment According to the standard, it is subject to mandatory standard regulations, and the activity of all recreational equipment, including amusement equipment, playgrounds, wind structures, water structures, and… without the approval of the standard organization is prohibited. It is also necessary to carry out various stages of design, construction, installation, and operation of the equipment under the supervision and approval of inspectors of the Standard Organization.
Elevator Mechanical Design
There are few people who can ride an elevator without a damper and start their day without fear of confined space and annoying thoughts. We all like not to feel that way when we take the elevator. Although we know that the designer and builder have designed and built the elevator in the safest condition, but in our cases, it has no effect and with an unpleasant feeling we are waiting for the display numbers to run out and reach the destination.